Equipment Description
Core clamping type foil winding machine is dedicated to power transformer and reactor foil coil winding. The coil of foil winding machine takes different thickness copper or aluminum foil strip as conductor, and wide strip insulation materials as layer insulation, to finish winding in coiled in the machine. At the same time, the machine can complete coils’ inside and outside surface wrapping. The form of coil can be round, oval and rectangle etc. This machine can wind coil on the core column with square section directly. There is clamping arm used for square core in winding faceplate and tailstock faceplate.The arm thickness can be adjustable. The adjust method is screw type, with the range 0-350mm. Its width is 0-180mm, which is also suitable for different specification cores. Winding faceplate and tailstock support faceplate are linkage.
Main Technical Parameters
No. |
Item |
Specification Parameter |
1 |
Axial Length |
600mm |
2 |
Foil Thickness |
Copper foil/ Aluminum foil::0.1—2.0mm |
3 |
Coil Outer Diameter(Without connection line |
Φ720 |
4 |
Cylinder Expansion Range |
φ450-φ520 |
5 |
Coil Form |
Round/Rectangle/Oval |
6 |
Winding Speed |
0-30r/min |
7 |
Speed Regulation Way |
Frequency Conversion Step-less |
8 |
Winding Power |
11KW |
9 |
Clamping Way |
Two sides synchronization clamping |
10 |
Form of Winding Spindle |
Mechanical Clamping |
11 |
Rectify Deviation Way |
Photoelectric Sensing Automatic Rectify Deviation |
12 |
Rectify Deviation Precision |
±0.5 mm |
13 |
Auto-Edge Covering Device of Layer Insulation |
1 set |